4 Zone Universal Wheel RF Remote (DIM/CCT/RGB/RGBW/RGB+CCT)

This sleek black RF Remote can be used to control single colour, dual colour, multi-colour RGB or RGBW, or RGB+CCT LED products.

It can be paired with multiple controller receivers, such as our Controller Receiver 20A, our Dimmer Receiver 10-15A, or our Universal WIFI & RF Controller Receiver.

This remote has a range of approx. 30m and will operate through walls and most other barriers inside your home. Each remote comes with a wall mountable cradle for safe storage of the remote when not in use. It also comes with an adhesive foam pad and 2 screws for mounting.

The lights will fade on when you use this remote to turn them on, and vice-versa when you turn them off.
You can control static colours using the colour wheel, which also doubles as a dimmer wheel for single colour lights, or a colour wheel for dual colour lights.

Short press the zone buttons (1, 2, 3, 4) to select and turn on that zone. Long press (2 seconds) to turn off the zone light. Short press multiple zone keys quickly to select multiple zones which can then be controlled synchronously. Each zone can be programmed to a different type of control, eg: Zone 1 can be Single Colour, Zone 2 as RGB, Zone 4 as RGBW and Zone 4 as CCT (Colour Temperature Adjustable) (or any combination with the correct control base).

On the middle row of buttons, the small star and large star on the left control the brightness of the lights - short press for 10 levels of brightness control or long press for 256 levels of adjustment. The CCT and RGB buttons on the right are used to control their stated modes for when using a RGB+CCT lighting product on any of the zones.

Press the first button on the bottom row to enter dynamic mode for the selected zone, or long press (2 seconds) to cycle through the dynamic modes. The second button on the bottom row can adjust the speed of the dynamic modes. There are 10 speed levels; long press this button to return to the default speed.

There are 2 scene buttons (S1, S2) which can be used to save specific scenes for future use. Long press (2 seconds) the scene button to save the current scene. The green indicator light on the remote will flash when the save has been successful. Short press the scene button to recall the saved scene.

The colour wheel will enter power save mode after a few seconds without use in order to preserve remote batteries. Press any key to make touch wheel exit power save mode.

See the Supporting Info tab for more instructions for use, including how to match the remote to a receiver.