4 Zone Dimmer/CCT Controller Remote (Only 10 remaining)
| Zones | 4 Zone |
|---|---|
| Function | Dimmer, CCT |
| Input Voltage | 12-24V DC |
| Remote Range | 30m |
| Remote Battery | 2x AAA (not included) |
| Weight | 45g |
| Remote Dimensions | L=110mm, W=53mm, H=22mm |
This item is end of line - limited stock remaining!
This RF Remote can be used to control either of our 4 Zone receiver units: the Colour Temperature Adjustable (CCT) Receiver or Dimmer Receiver; or a mixture of the two types together! It can be used to control both 12V and 24V LED products, and multiple bases can be programmed to each zone for simultaneous control.
It has 11 steps for brightness adjustment, and/or 11 steps for CCT adjustment. Night light mode enables you to set the brightness automatically to a low-level light to run until the settings are modified again. The contollers will remember the last setting when powered off, even if they have experienced a period of power loss. You also have the option of controlling each zone individually, or all zones synchronised.
This remote has a range of 30m and will operate through walls and most other barriers inside your home.
If you require a wall-mounted cradle to hold your remote, you can view them here.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
