4 Zone CCT Wheel RF Remote

This sleek black RF Remote can be used to control our Controller Receiver 20A, or our Universal WIFI & RF Controller Receiver. It can be used to control dual colour 12V, 24V, 36V or 48V LED products and can be paired with multiple controller receivers.

This remote has a range of 30m and will operate through walls and most other barriers inside your home.
Each remote comes with a wall mountable cradle for safe storage of the remote when not in use. It also comes with an adhesive foam pad and 2 screws for mounting.

The lights will fade on when you use the master on/off button on the remote to turn them on, and vice-versa when you turn them off.

Short press the zone buttons (1, 2, 3, 4) to select and turn on that zone. Long press (2 seconds) to turn off the zone light. Short press multiple zone keys quickly to select multiple zones which can then be controlled synchronously.

You can control the colour using the colour wheel, scrolling around to increase or decrease the colour temperature.

There are 4 scene buttons (S1, S2, S3, S4) which can be used to save specific scenes for future use. Long press (2 seconds) the scene button to save the current scene. The green indicator light on the remote will flash when the save has been successful. Short press the scene button to recall the saved scene.

See the Supporting Info tab for more instructions for use, including how to match the remote to a receiver.

Also available in a 1-Zone remote option, which can only be used to control a single zone.