1 Zone CCT Wheel RF Remote

This sleek black RF Remote can be used to control our Controller Receiver 20A, or our Universal WIFI & RF Controller Receiver. It can be used to control dual colour 12V, 24V, 36V or 48V LED products and can be paired with multiple controller receivers.

This remote has a range of 30m and will operate through walls and most other barriers inside your home.
Each remote comes with a wall mountable cradle for safe storage of the remote when not in use. It also comes with an adhesive foam pad and 2 screws for mounting.

The lights will fade on when you use this remote to turn them on, and vice-versa when you turn them off.

You can control the colour using the colour wheel, scrolling around to increase or decrease the colour temperature. The small and large star buttons can be used to adjust brightness - short press for 10 levels of brightness control or long press for 256 levels of adjustment.

The CW and WW buttons set the light directly to their corresponding colours.

The middle row of buttons switch the lights directly to 25%, 50%, 75% or 100% brightness.

There are 4 scene buttons (S1, S2, S3, S4) which can be used to save specific scenes for future use. Long press (2 seconds) the scene button to save the current scene. The green indicator light on the remote will flash when the save has been successful. Short press the scene button to recall the saved scene.

See the Supporting Info tab for more instructions for use, including how to match the remote to a receiver.

Also available in a 4-Zone option, which can be used to control up to 4 different areas of lighting independently.