LED Driver 30W Triac Dimmable 220-240VAC to 150-900mA 9-45VDC
- Buy 5 for Regular Price $34.90 each and save 8%
| Input Voltage | 200-240V AC |
|---|---|
| Output | 150-900mA, 9-45V (selectable) |
| Dimensions | L=162, W=45, H=24mm |
| IP Rating | Non-IP Rated |
| Weight | 144g Net / 166g Gross |
| Standards | SELV |
| SDoC | Available on request |
This 30W Driver is a Constant Current LED Driver which supports a range of set currents (Ampres [A]) to suit a range of products. It is relatively small, non-waterproof and runs from mains 230V AC.
It is TRIAC dimmable from 0 to 100%, depending on the dimmer brand you are using; please ensure your dimmer is capable of dimming to 1% if you wish to dim to this level. You can use this driver with our Kiwi Mains Wall Dimmer, set to trailing edge setting.
Set the required Current to a value between 150mA (0.15A) and 900mA (0.9A) via the dip-switches located at the output end of the driver (under the plastic cap). The maximum voltage required for the LED proudct must fall within the voltage range specified for the set current (see the list below). If you require a different volage range, please see our 12W driver 3-24VDC here, or our 40W driver 9-45VDC here.
Current Selection Options:
- 150mA - 9-45V
- 200mA - 9-45V
- 250mA - 9-45V
- 300mA - 9-45V
- 350mA - 9-45V
- 400mA - 9-45V
- 450mA - 9-45V
- 500mA - 9-45V
- 550mA - 9-45V
- 600mA - 9-45V
- 650mA - 9-45V
- 700mA - 9-45V
- 750mA - 9-40V
- 800mA - 9-37V
- 850mA - 9-35V
- 900mA - 9-33V
Supplier Declaration of Conformity (SDoC) is available on request - please contact us.
This is suitable for running LEDs only.