LED Driver 12W Triac Dimmable 200-240VAC to 350-700mA 3-24VDC
- Buy 5 for Regular Price $22.90 each and save 12%
| Input Voltage | 220-240V AC |
|---|---|
| Output | 350-700mA, 3-24V (selectable) |
| Dimensions | L=111, W=36, H=21mm |
| IP Rating | Non-IP Rated |
| Weight | 66g Net / 84g Gross |
| Standards | SELV |
| SDoC | Available on request |
This 12W Driver is a Constant Current LED Driver which supports a range of set currents (Ampres [A]) to suit a range of products. It is relatively small, non-waterproof and runs from mains 230V AC.
It is TRIAC dimmable from 0 to 100%, depending on the dimmer brand you are using; please ensure your dimmer is capable of dimming to 1% if you wish to dim to this level. You can use this driver with our Kiwi Mains Wall Dimmer, set to trailing edge setting.
Set the required Current to a value between 350mA (0.35A) and 700mA (0.7A) via the dip-switches located at the output end of the driver (under the plastic cap). The maximum voltage required for the LED proudct must fall within the voltage range specified for the set current (see the list below). If you require a different volage range, please see our 30W driver 9-45VDC here, or our 40W driver 9-45VDC here.
Current Selection Options:
- 350mA - 3-24V
- 400mA - 3-24V
- 450mA - 3-24V
- 500mA - 3-24V
- 550mA - 3-22V
- 600mA - 3-20V
- 650mA - 3-18V
- 700mA - 3-17V
Supplier Declaration of Conformity (SDoC) is available on request - please contact us.
This is suitable for running LEDs only.