DMX & RF Wall Touch Plate RGBW Controller 230V - 4 Zone (Only 2 remaining)
- Buy 3 for Regular Price $75.90 each and save 4%
| Zones | 4 Zone |
|---|---|
| Function | RGBW |
| Input Voltage | 100 - 230V AC |
| Output Connection | DMX512 |
| Output | DMX512 or RF |
| Max Current | 0.1A |
| Operating Temperature | -30°C to +55°C |
| Remote Range | 10m |
| Remote Frequency | 2.4 GHz |
| Weight | 0.18kg Net, 0.237kg Gross |
| Dimensions | L=86mm, W=86mm, D=33mm |
This RGBW Control unit is designed to be used with a DMX system for superior light control! It can be used with any 4 Chanel DMX512 standard decoders such as our DMX 12-24V 4-Channel Decoder, or 3rd party DMX decoders.
Don't have DMX? No problem - these units can also control our 12-36V 4 Channel Controller or our 12-36V Universal Controller Reciever directly through RF, so no need for pesky wire links.
If using this with the RF Recievers, you then also have the option of using a separate Remote Control alongside. If using with the Universal reciever specifically, you can also control this via WIFI using the Tuya App, giving you ultimate control over your lighting system!
It has a clean modern look with its glass touch panel, and it emits a pleasant sound to indicate when a touch has registered - however this can be turned on/off (muted) simply by pressing and holding the power button until it sounds. A blue indicator light shows just above the power button when the unit is powered off so that it is easy to locate in the dark.
This is a Master/Controller unit that sends a signal to a DMX decoder (sold separately) to control any RGBW LED products such as our RGBW Striplight or Outdoor lighting range, making it quite the versatile control system.
The top 4 buttons control the 4 different zones available; press to turn on and long press 2 seconds to turn them off again. This enables you to control each zone individually, or all / a combination of zones at the same time. Control the brightness of a single colour up and down, or change the speed of colour changing mode using the ‘BRT/SPEED’ button to the right hand side of the colour dial.
Set it to a specific colour at any time simply by selecting the desired colour on the colour wheel dial, or set to red, green, blue, or white mode by touching one of the colour keys along the bottom of the panel. Change the brightness of these colours by touching and holding the same colour keys. Change to a mode and scroll through the different modes by touching the ‘MODE’ button to the left of the colour dial. This will also jump back to the last mode set when touched after having set a static colour using the wheel dial.
This square panel fits in a standard 86 size flush box or round European style flush box.
Please see the supporting info tab for more information in the product manual.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
