DMX & RF Wall Touch Plate RGB Controller 230V - 4 Zone
- Buy 3 for Regular Price $74.90 each and save 4%
| Zones | 4 Zone |
|---|---|
| Function | RGB |
| Input Voltage | 100 - 230V AC |
| Output Connection | DMX512 |
| Output | DMX512 or RF |
| Max Current | 0.1A |
| Operating Temperature | -30°C to +55°C |
| Remote Range | 10m |
| Remote Frequency | 2.4 GHz |
| Weight | 0.18kg Net, 0.237kg Gross |
| Dimensions | 86mm Long x 86mm Tall x 33mm Deep overall, glass face 11.2mm Deep |
This RGB Control unit is designed to be used with a DMX system for superior light control! It can be used with any DMX512 standard decoders such as our DMX 12-24V 4-Channel Decoder, or 3rd party DMX decoders.
Don't have DMX? No problem - these units can also control our 12-36V 4 Channel Controller or our 12-36V Universal Controller Reciever directly through RF, so no need for pesky wire links.
If using this with the RF Recievers, you then also have the option of using a separate Remote Control alongside. If using with the Universal reciever specifically, you can also control this via WIFI using the Tuya App, giving you ultimate control over your lighting system!
It has a clean modern look with its glass touch panel, and it emits a pleasant sound to indicate when a touch has registered - however this can be turned on/off (muted) simply by pressing and holding the power button until it sounds. A blue indicator light shows just above the power button when the unit is powered off so that it is easy to locate in the dark.
This is a Master/Controller unit that sends a signal to a DMX decoder (sold separately) to control any RGB LED products such as our Striplight or RGB Outdoor lighting range, making it quite the versatile control system.
The top 4 buttons control the 4 different zones available; touch to turn on and long press 2 seconds to turn them off again. This enables you to control each zone individually, or all / a combination of zones at the same time. Control the brightness of a single colour up and down by touching the ‘sun’ button, or change the speed of fade/flash between colours in the colour-changing modes using the 'double arrow' key below the colour dial.
Set it to a specific colour at any time simply by selecting the desired colour on the colour wheel dial, or set to one of the dynamic colour-changing modes by touching the ‘M’ button. Scroll through the different modes by touching the mode key repeatedly. This will also jump back to the last mode set when touched after having set a single colour on the colour wheel dial.
Love the current setting a want to make it your favourite? Touch and hold the ‘S’ key for 2 seconds to save a particular lighting setting to the ‘Scene’ button for easy access in the future. .
This square panel fits in a standard 86 size flush box or round European style flush box.
Please see the supporting info tab for more information in the product manual.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.