4 Zone RGB/RGBW Controller Wheel RF Remote
- Buy 2 for Regular Price $44.90 each and save 10%
| Zones | 4 Zone |
|---|---|
| Function | RGB, RGBW |
| Remote Range | 30m |
| Remote Frequency | RF 2.4GHz |
| Remote Battery | 2x AAA (included) |
| Weight | 60g |
| Remote Dimensions | L=122mm, W=53mm, H=17.5mm |
This sleek black RF Remote can be used to control our Controller Receiver 12-36V 20A (RGB-RGBW-CCT-DIM). It can be used to control multi-colour RGB or RGBW 12V, 24V or 36V LED products and can be paired with multiple controller receivers.
This remote has a range of 30m and will operate through walls and most other barriers inside your home.
Each remote comes with a wall mountable cradle for safe storage of the remote when not in use. It also comes with an adhesive foam pad and 2 screws for mounting.
The lights will fade on when you use this remote to turn them on, and vice-versa when you turn them off.
You can control the static colour using the colour wheel.
Short press the zone buttons (1, 2, 3, 4) to select and turn on that zone. Long press (2 seconds) to turn off the zone light. Short press multiple zone keys quickly to select multiple zones which can then be controlled synchronously.
Short pressing the middle row of buttons (R, G, B, W) will select the corresponding colour directly. Long press to adjust the RGBW hue.
Press the first button on the bottom row to enter dynamic mode for the selected zone, or long press (2 seconds) to cycle through the dynamic modes.
The second button on the bottom row can adjust the brightness of the static colour, or the speed of the dynamic modes. There are 10 speed/brightness levels. Long press this button to return to the default speed.
There are 2 scene buttons (S1, S2) which can be used to save specific scenes for future use. Long press (2 seconds) the scene button to save the current scene. The green indicator light on the remote will flash when the save has been successful. Short press the scene button to recall the saved scene.
The colour wheel will enter power save mode after a few seconds without use in order to preserve remote batteries. Press any key to make touch wheel exit power save mode.
The controller will remember the last setting when powered off, even if it has experienced a period of power loss. This is so it can be used with a wall switch if required.
See the Supporting Info tab for more instructions for use, including how to match the remote to a receiver.
Also available in a 1-Zone Remote option, which can only be used to control a single zone.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
