1 Zone RGB/RGBW Controller Wheel RF Remote
- Buy 2 for Regular Price $44.90 each and save 4%
| Zones | 1 Zone |
|---|---|
| Function | RGB, RGBW |
| Remote Range | 30m |
| Remote Frequency | RF 2.4GHz |
| Remote Battery | 2x AAA (included) |
| Weight | 60g |
| Remote Dimensions | L=122mm, W=53mm, H=17.5mm |
This sleek black RF Remote can be used to control our Controller Receiver 12-36V 20A (RGB-RGBW-CCT-DIM). It can be used to control single-colour, colour temperature adjustable, or multi-colour 12V, 24V or 36V LED products and can be paired with multiple controller receivers.
This remote has a range of 30m and will operate through walls and most other barriers inside your home.
Each remote comes with a wall mountable cradle for safe storage of the remote when not in use. It also comes with an adhesive foam pad and 2 screws for mounting.
The lights will fade on when you use this remote to turn them on, and vice-versa when you turn them off.
You can control the static colour using the colour wheel.
Short press the first button on the top row to switch between 24 static RGB colours. Long press for continuous static colour adjustment.
Press the second button to enter dynamic mode, or long press (2 seconds) to cycle through the dynamic modes.
Adjust the speed of the dynamic modes by short pressing the third button. There are 10 speed levels. Long press this button to return to the default speed.
The fourth button allows you to adjust brightness - short press for 10 levels of brightness control or long press for 256 levels of adjustment.
Short pressing the middle row of buttons (R, G, B, W) will select the corresponding colour directly. Long press to adjust the RGBW hue.
There are 4 scene buttons (S1, S2, S3, S4) which can be used to save specific scenes for future use. Long press (2 seconds) the scene button to save the current scene. The green indicator light on the remote will flash when the save has been successful. Short press the scene button to recall the saved scene.
The colour wheel will enter power save mode after a few seconds without use in order to preserve remote batteries. Press any key to make touch wheel exit power save mode.
The controller will remember the last setting when powered off, even if it has experienced a period of power loss. This is so it can be used with a wall switch if required.
See the Supporting Info tab for more instructions for use, including how to match the remote to a receiver.
Also available in a 4-Zone Remote option, which can be used to control up to 4 zones of lighting independently.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
