Strip Light Continuous COB Waterproof 12V - RGB

Priced per meter. This strip is available as 5m in a continuous roll; run up to 5m in a single length

This flexible COB (Chip on Board) LED strip light is perfect for background lighting, lighting in cupboards, and decorating your home. Its continuous design makes it ideal for installing in places where you don't want to see the dots of the individual LEDs, such as under cupboards above benches. It is constructed with a very flexible circuit conducting strip which the LEDs are mounted on and comes with an adhesive 3M backing.

You are currently viewing the IP66 waterproof version of this strip. If you require non-waterproof, view it here.

This strip is also available in 24VDC. It is an RGB colour-changing strip, and therefore needs to be paired with an RGB controller to operate.

It has a thin white bounding wall on either side of the strip, which narrows the spread of light. Our other COB strips have a 170° beam angle, whereas our RGB COB only has 120° beam.

Once purchased, the strip light can be cut at 55.5mm intervals, and cut lengths can be joined or run from a separate power supply making it very versatile. Use our 10mm end caps and some silicone to waterproof the ends if cutting your strip.

Although this strip light is sold per meter, it comes in 5m reels. Please tell us when purchasing what lengths you require, otherwise your order will be made up from single lengths up to 5m in one length. For example, if you purchase a quantity of ‘3’ we will send it to you as a single 3m length.

If you require custom lengths (multiples of 17.85mm) made up from your purchased amount, purchase a strip light waterproof wiring service for each additional length and specify the lengths you require in the comments field during the checkout process. For example, if you purchase 2m in total and want 1x 1.5m and 1x 0.5m lengths.

You must purchase 1x wiring service for each additional length (1x wiring service is already part of the strip light length); failure to do so may delay your order shipping in a timely manner, as we will have to contact you for additional payment.

The standard wire length supplied is 200mm. If you need more wire length added to your strip, simply add multiples of 1m lengths of 4-Core DC wire to your purchase, and specify what you would like in the comments section.

For a modern and clean look, install this strip light in one of our aluminium strip light channels.

Please note that you will require a controller unit to change and set the colour output of this RGB product.

Please take care when installing this strip - gently dab your fingers along the length to ensure good adhesion. Don't run your fingers along it, as this can damage the LEDs and cause dark spots.