Waterproofing End Caps for 10mm Strips - 5 Pairs
- Buy 5 for Regular Price $3.40 each and save 13%
- Buy 20 for Regular Price $2.90 each and save 26%
| Material | Silicone |
|---|---|
| Quantity | 5 pairs |
| Dimensions | W=6mm, L=12.5mm, H=9.8mm |
These end caps are for use with our 10mm wide waterproof strips such as 3528 and COB.
If you want to cut waterproof strip into multiple lengths, you will need these silicone end caps to complete the job. We sell them in a set of 5 pairs, where each pair has one end cap and one cap with 2 holes in it for the wires.
We recommend using a good quality silicone adhesive to glue the end caps on for optimum performance and waterproofing. If you are not confident cutting and sealing the waterproof strip light yourself, you can purchase our wiring service.
If your wire is a round cable with outer insulation, such as with the RGB strip, you can cut the two holes into a single hole.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.