Strip Light 120 2525 LEDs/m 3mm 1-LED Cuttable 24V
| Dimmable | Yes |
|---|---|
| Input Voltage | 24V DC |
| Power Consumption | 10W/m |
| Brightness | 1020Lm/m |
| IP Rating | IP20 (Non-Waterproof) |
| Average Lifetime | 40,000 hours |
| Light Source | 120 2525 LEDs/m |
| Light Colour | Cool White (6500K) |
| CRI | >90 |
| Beam Angle | 170° |
| Working Temperature | -20 - 60°C |
| Type | Static |
| Cut Length | 8.33mm |
| Dimensions | W=3mm, H=2mm. Multiples of 8.33mm (5m max) |
Priced per meter. This strip is available as 5m in a continuous roll; run up to 6m in a single length
This ultra thin 3mm width strip can fit into areas that most other strips cannot, and can fit into our special 5mm wide channels, in which it gives an ultra slim sleek thin line of light.
This strip runs from 24VDC and so you will require a 24V Power Supply to run it from.
Another advantage of the thin width of this strip means that it can be gently manipulated around gentle curves, so it is easier to use for large lettering.*
Once purchased, the strip light can be cut at every LED - every 8.33mm - and cut lengths can be joined or run from a separate power supply making it very versatile.
This flexible LED strip light is perfect for background lighting, lighting in cupboards, and decorating your home. It is constructed with a very flexible circuit conducting strip which the LEDs are mounted on and comes with an adhesive 3M backing.
Although this strip light is sold per meter, it comes in 5m reels. Please tell us when purchasing what lengths you require, otherwise your order will be made up from single lengths up to 5m in one length. For example, if you purchase a quantity of ‘3’ we will send it to you as a single 3m length.
If you require custom lengths (multiples of 8.33mm) made up from your purchased amount, purchase a strip light wiring service for each additional length and specify the lengths you require in the comments field during the checkout process. For example, if you purchase 2m in total and want 1x 1.5m and 1x 0.5m lengths.
You must purchase 1x wiring service for each additional length (1x wiring service is already part of the strip light length); failure to do so may delay your order shipping in a timely manner, as we will have to contact you for additional payment.
The standard wire length supplied is 200mm. If you need more wire length added to your strip, simply add multiples of 1m lengths of 2-Core DC wire to your purchase, and specify what you would like in the comments section.
For a modern and clean look, install this strip light in one of our aluminium strip light channels.
Check out our dimmer controller units for added control over the brightness of this strip.
*Not recommended for a radius smaller than 20cm.