PIR Motion Sensor Adjustable & Tiltable 12V DC 4A - Back Mount
Housing Colour | Black |
---|---|
Input Voltage | 12V DC |
Max Output | 8A |
Sensor Range | ~12m |
Sensor Angle | 180° |
On Time | 5 seconds to 6 minutes (adjustable) |
IP Rating | IP44 |
Dimensions | L=188mm, W=64mm, D=50mm |
This surface-mounted PIR sensor can be used for automatic lighting applications in and around your home.
It is easy to install and simple to use, and comes with two phillips-head screws and nylon screw anchors to fasten to a vertical surface. It runs from 12V DC and is wired between the power supply and light (see the diagram for wiring instructions). Install 1.5-2.5m above the ground for best sensor results.
It is IP44 rated, so must be installed in an area protected from the weather, and is made from ABS plastic.
PIR sensors detect infrared heat, making them ideal for sensing human bodies. The sensor will detect any part of the human body once it is within 12m, activating the light. The light will stay on for anywhere between 5 seconds and 6 minutes, depending on the settings.
There are 3 adjustable dials on the top of each sensor:
SENS: The IR sensitivity to people, animals etc. Increase (clockwise) for more sensitivity.
TIME: The time the light remains on. Increase (clockwise) for longer on time.
LUX: The light level the light will start operation. Increase (clockwise) for operating in brighter conditions (earlier in the evening).
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.