Strip Light Cut Anywhere COB 24V IP20 - Warm White

Priced per meter. Run up to 8m in a single length.

This flexible Cut-Anywhere COB (Chip on Board) LED strip light is our most versatile and easiest to use strip yet! While it has solder points every 12mm, you can litterally cut it anywhere in-between. At worst you may damage and lose a single LED in the strip - our traditional 24V COB strip could only be cut every 45.5mm, and any mis-cuts resulted in whole dead sections! This is perfect for getting exact lengths for decorating your home.

Its continuous design makes it ideal for installing in places where you don't want to see the dots of the individual LEDs, such as under cupboards above benches. It is constructed with a very flexible circuit conducting strip which the LEDs are mounted on and comes with an adhesive 3M backing.

Once purchased, the strip light can be cut anywhere, and cut lengths can be joined or run from a separate power supply making it very versatile.

Although this strip light is sold per meter, it comes in 5m reels. Please tell us when purchasing what lengths you require, otherwise your order will be made up from single lengths up to 5m in one length. For example, if you purchase a quantity of ‘3’ we will send it to you as a single 3m length.

If you require custom lengths made up from your purchased amount, purchase a strip light wiring service for each additional length and specify the lengths you require in the comments field during the checkout process. For example, if you purchase 2m in total and want 1x 1.5m and 1x 0.5m lengths.

You must purchase 1x wiring service for each additional length (1x wiring service is already part of the strip light length); failure to do so may delay your order shipping in a timely manner, as we will have to contact you for additional payment.

The standard wire length supplied is 200mm. If you need more wire length added to your strip, simply add multiples of 1m lengths of 2-Core DC wire to your purchase, and specify what you would like in the comments section.

Check out our dimmer controller units for added control over the brightness of this strip.

For a modern and clean look, install this strip light in one of our aluminium strip light channels.

PLEASE TAKE CARE WHEN INSTALLING THIS STRIP - GENTLY DAB YOUR FINGERS ALONG THE LENGTH TO ENSURE GOOD ADHESION. DON'T RUN YOUR FINGERS ALONG IT, AS THIS CAN DAMAGE THE LEDS AND CAUSE DARK SPOTS.