Backlight Sheet Module - High CRI 24V
| Dimmable | No |
|---|---|
| Input Voltage | 23-25V DC |
| Power Consumption | 60W /sheet |
| Brightness | 6250Lm /sheet |
| IP Rating | IP20 (non-waterproof) |
| Average Lifetime | 40,000 hours |
| Light Source | 288 x 2835 SMD LEDs/m |
| Light Colour | Pure White (6000-6500K) |
| CRI | >95 |
| Beam Angle | ~120° |
| Type | Static |
| Cut Length | No |
| Wire Length | 480mm |
| Dimensions | L=480mm, W=240mm, thickness=1.4mm |
| Features | UV Stabilised |
This flexible LED sheet module is perfect for backlighting when you want an even light spread. It is an easy solution for illuminating light boxes, and since it can be cut every LED, this means that it can be split not only into strips but also odd shapes, such as letters.
It is constructed with a very flexible circuit conducting sheet (like a strip light) on which the LEDs are mounted and comes with an adhesive 3M backing. Once purchased, the strip light can be cut easily with scissors at every LED (approximately 20mm squares) and cut pieces can be joined or run from a separate power supply. Every LED has solder points to connect power, and so cut pieces can be powered from anywhere on the sheet.
The standard wire length supplied is 480mm. If you need more wire length added to your product, simply add multiples of 1m lengths of 2-Core DC wire to your purchase and specify what you would like in the comments section. This is also a good time to move where the wire is connected to the sheet - just let us know where you want the new wire joined.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.