8 Zone RGB Controller Receiver 12/24V 15A (Only 6 remaining)
| Zones | 8 Zone |
|---|---|
| Function | RGB |
| Input Voltage | 12/24V DC |
| Output | 6A max per channel, 15A max total |
| Weight | 52g |
| Controller Dimensions | L=90mm, W=48mm, H=24mm |
This item is end of line - limited stock remaining!
This RGB Controller Receiver can be used to control any 12 or 24V RGB LED product, such as our RGB strip light.
It can run up to 15A total over 3 channels, 6A max per channel.
The base stations are wirelessly controlled, so you do not need to run signal wires between areas, and you can run 12V products and 24V products from the same remote.
It will remember the last setting when powered off, even after experiencing a period of power loss.
Note this product needs to be accompanied with an 8 Zone Controller Remote. This remote allows you to choose between 8 different zones, and can be used with RGB or RGBW controllers, or a mix of both! It can turn them on and off, change and dim the LEDs in each zone independently. You will need at least one controller for each zone you wish to run, but one remote will operate them all. Please see 8 Zone Controller Remote for more details on the remote's functionality.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
