Wall Light Long Linear Rear Glow 24V IP65
| Housing Colour | Black |
|---|---|
| Input Voltage | 24VDC |
| Power Consumption | 20W |
| Light Source | 3m COB Strip 3000K IP65 |
| Output | 1500Lm |
| Average Lifetime | 50,000 hours |
| Beam Angle | 360° |
| IP Rating | IP65 |
| Light Colour | Warm White (3000K) |
| Cable Length | 500mm |
| Dimmable | Yes |
| Material | Aluminium Alloy & Acrylic |
This outdoor light fitting has a stylish long linear design and looks great as a feature on exterior walls or columns. It is built from solid opaque acrylic and robust aluminium alloy with black powder-coating in a textured matte finish. It has one long IP65 COB Striplight circling the inner edge of the acrylic, which makes a nice even glow out the edges and onto the mounting surface in a 360 degree spread. This fitting runs from 24VDC and draws a total of 20W. It outputs approx 1500 lumens of Warm White light.
Rated IP65, these units are waterproof, dust tight, and protected from water jets. Ensure the rubber seals located where the wires exit at the rear of the unit, and between the rear panel and the main unit are in place to ensure it is watertight.
Each fitting comes with 2x screws, nylon screw anchors, a screw terminal connector block, and a hex tool.
You will require a 24VDC power source to run this from - see our range of compatible supplies here. Run a single light from a smaller supply, or multiple lights from a larger capacity model. Contact our friendly staff for help in determining the size/model you require.