UFO High Bay Light 230V 3-Power Selectable - 3 Colour Selectable
Housing Colour | Black |
---|---|
Input Voltage | 230V AC |
Power Consumption | 120W, 200W or 240W |
Light Source | Phillips 2835 SMD LEDs |
Output | 45,600Lm |
Efficiency | 190Lm /W |
Average Lifetime | 50,000 hours |
Beam Angle | 120° |
Working Temperature | -20°C to 55°C |
Working Humidity | 10-90% |
CRI | Ra > 80 |
Power Factor | >0.95 |
IP Rating | IP65 |
Light Colour | Warm 3000K/Neutral 4000K /Cool 6000K White |
Dimensions | D=335mm, H=195mm |
Plug Type | 3.2m long power lead with 3-pin plug |
Dimmable | Yes |
Material | Aluminium with PC Lens |
Weight | 3.7Kg Gross |
Features | Mounting Eyelet |
SDoC | Available on request |
A direct replacement for halogen or metal halide fittings, our LED UFO high bay lights produce a super bright light equivalent to a 480W metal halide. They last many times longer and give a very consistent light output with a wider 120° spread of light. This makes them suitable for general lighting applications in warehouses, factories and any application where there is a high stud.
This model is 3-power selectable: choose from 240W, 200W or 120W to adjust the brightness. The maximum output of this light is a whopping 45,600 lumens! To select the brightness, simply adjust the switch on the rear of the unit.
Additionally, it is also 3-colour selectable: choose from Cool White, Neutral White, or Warm White to suit your preference or application. To select the colour simply adjust the second switch on the rear of the unit.
This light is also 0-10V dimmable via the additional cable near the power cable.
It runs directly from mains 230V AC and come with a mounting hook, and a 3.2m long power lead with 3-Pin NZ Mains plug ready to plug into a mains socket.
The unit is rated IP65 so can be used in refrigerated units and other damp conditions, however the power connection itself needs to be made waterproof, so should be housed in a waterproof junction box where necessary. It is made from aluminium and polycarbonate (PC) and constructed with good quality surface-mount LEDs and an internal built-in Sosen driver for elemental protection and extended lifetime.
Supplier Declaration of Conformity (SDoC) is available on request - please contact us.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.