Strip Light Continuous COB 24V - Side View RGB

Priced per meter. Run up to 8m in a single length.

This flexible COB strip has a point of difference - it has the LED's facing sideways, projecting the light out in one direction; this means it can be installed on a vertical curved surface to shine up or down! It is constructed with a very flexible circuit conducting strip which the LEDs are mounted on and comes with an adhesive 3M backing.

It is an RGB colour-changing strip, and therefore needs to be paired with an RGB controller to operate.

We currently only stock this model in an non-waterproof IP20 version of this strip.

Once purchased, the strip light can be cut at 50mm intervals, and cut lengths can be joined or run from a separate power supply making it very versatile.

Although this strip light is sold per meter, it comes in 5m reels. Please tell us when purchasing what lengths you require, otherwise your order will be made up from single lengths up to 5m in one length. For example, if you purchase a quantity of ‘3’ we will send it to you as a single 3m length.

If you require custom lengths (multiples of 50mm) made up from your purchased amount, purchase a strip light wiring service for each additional length and specify the lengths you require in the comments field during the checkout process. For example, if you purchase 2m in total and want 1x 1.5m and 1x 0.5m lengths.

You must purchase 1x wiring service for each additional length (1x wiring service is already part of the strip light length); failure to do so may delay your order shipping in a timely manner, as we will have to contact you for additional payment.

The standard wire length supplied is 200mm. If you need more wire length added to your strip, simply add multiples of 1m lengths of 4-Core DC wire to your purchase, and specify what you would like in the comments section.

For a modern and clean look, install this strip light in one of our aluminium strip light channels.

Please note that you will require a controller unit to change and set the colour output of this RGB product.
When used with an RGB controller, you can set the colour or have it flashing/fading through the colours - the modes available depend on the model of controller used.

Please take care when installing this strip - gently dab your fingers along the length to ensure good adhesion. Don't run your fingers along it, as this can damage the LEDs and cause dark spots.