Strip Light 60 5050 LEDs/m 48V - Waterproof

Priced per meter. This strip is available as 10m in a continuous roll; run up to 20m in a single length.

This flexible LED strip light is perfect for when you want to run longer lengths of colour changing strip, especially outdoors. 24V strip is often limited to around 8-10m in length as the voltage drop over the strip length starts to affect the colours at the far end of the strip. By running a higher voltage, we are able to run longer lengths as voltage drop effect is reduced.

This strip gives you the flexibility of having RGB colour-changeable lighting, but also have the option of a nice white light due to its designated Warm White integrated chip. The RGBW also allows you to mix all the RGB colours together to make a Cool White light. It's great for background lighting, under kitchen benches or bars, as up lighting in coves or pelmets, and in entertainment areas.

Run 15m in a single run without a drop in brightness, and up to 20m with a small drop in brightness at the far end*, without having to run extra wires.

With its 120 LEDs per metre light density, and producing an impressive 1300 lumens per metre, this strip simply looks great! If you need to dim it, pair this with our new CONS RF single- and multi- zone remote control dimmers.

This strip is IP68 waterproof making it ideal for outdoor installations or where moisture can be an issue. This is also available in an IP20 non-waterproof model here.

This flexible LED strip light is perfect for light feature lighting, such as under lighting in cupboards, vehicles, decorating your home, and creating outdoor feature accents. It is constructed with a very flexible circuit conducting strip which the LEDs are mounted on, coated with a protective silicon rubber and comes with an adhesive 3M backing.

Once purchased, the strip light can be cut at 200mm intervals, and cut lengths can be wired together or run from a separate power supply making it very versatile.

Although this strip light is sold per meter, it comes in 10m reels. Please tell us when purchasing what lengths you require, otherwise your order will be made up from single lengths up to 5m in one length. For example, if you purchase a quantity of ‘3’ we will send it to you as a single 3m length.

If you require custom lengths (multiples of 200mm) made up from your purchased amount, purchase a strip light wiring service for each additional length and specify the lengths you require in the comments field during the checkout process. For example, if you purchase 2m in total and want 1x 1.5m and 1x 0.5m lengths.

You must purchase 1x wiring service for each additional length (1x wiring service is already part of the strip light length); failure to do so may delay your order shipping in a timely manner, as we will have to contact you for additional payment.

The standard wire length supplied is 200mm. If you need more wire length added to your strip, simply add multiples of 1m lengths of 5-Core DC wire to your purchase, and specify what you would like in the comments section.

For a clean and modern look, install this strip light in one of our aluminium strip light channels. Please note that this is the widest/bulkiest strip we have, and will not fit the smaller channels – please check dimensions before purchasing.

Please note that as a 5-Wire RGBW colour changing product, you will require a controller unit to change and set the colour output on this product. You can see our range of controllers here. When used with an RGBW controller, you can set it to a single colour or have it flashing or fading through the colours - the modes available depend on the model of controller used.

Wiring note: The black wire is the common, which is wired to +48VDC. The Red, Green, White and Blue wires connect to ground via the controller.

*depending on the installation situation, such as number of joins, wire size, and wire length.