Spike Spotlight Colour-Changing 12V - 10W

Out of stock
Technical Data
Housing ColourBlack
Input Voltage11-14V DC
Power Consumption10W
Efficiency~75Lm /W
Light Source1 x 10W RGB LED
Average Lifetime30,000 hours
Beam Angle60°
Light ColourRGB Colour-Changing
IP RatingIP67
Working Temperature< 45°C
DimensionsLight L=85mm, Face Dia=56.5mm, Cable= ~2m

This LED outdoor or garden light is a robust waterproof unit designed to be pushed into the ground where a spotlight is required to shine onto a feature or into a tree for example. The tilt angle is adjustable by loosening and tightening the screw that attaches the spike to the light.

The unit has 1x high power RGB LED mounted inside a black powder-coated aluminium alloy that is waterproof IP67, and a high-strength polycarbonate lens face.

It has a light beam angle of 60 degrees to focus the light onto the area you want, whether that is a wall feature, sign, tree, or shrub.

This is a 4-Wire RGB colour-changing product: you will require a controller unit to change and set the colour output on this product. You can see our range of RGB controllers here. When used with an RGB controller, you can set the colour or have it flashing or fading through the colours - the modes available depend on the model of controller used.


This item contains a switch mode driver, which makes it more efficient and run at a constant brightness over a range of input voltages. However, this means it has an inrush current (draws extra power) for a brief period at start-up. This means that when running these from a power supply, you should double the calculated power when selecting a supply. For example, when running 3 of these from a 12V DC power supply, the power supply should be rated at 60W or more.

Also, any long lengths of cable powering these lights should be larger than normal to ensure correct power delivery.

Write Your Own Review
You're reviewing:Spike Spotlight Colour-Changing 12V - 10W
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 24 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.