Solar Motion Sensor Light - 3 Mode 62 LED

This solar light is perfect for outdoor areas you want to light without running cables to plug it in. It is ideal for illumination and security in the garden and outdoors, such as pathways, patios, and above the garage or shed doors. Just make sure the unit is installed so that the solar panel is lined up for optimal charging in the sunlight (this product will not be suitable in situations that face away from the sun or in dark/shaded areas).

It has a sliding switch on the back side of the device to turn it off or to the desired working mode.
These modes are OFF/1/2/3, where:

• Mode 1 = Sensor Mode: The light comes on at night on full brightness when the sensor is triggered, otherwise it is off. The light stays on while it detects movement, then turns off again 15-30 seconds after last movement is detected.
• Mode 2 = Dim Mode: The light comes on dimly at dusk and stays on all night (battery charge allowing), unless the sensor is triggered which causes the light to come on full brightness. The light stays on full brightness while it detects movement, then turns back to dim mode again 15-30 seconds after last movement is detected.
• Mode 3 = Bright Mode: The light comes on full brightness at dusk and stays on all night (battery charge allowing), whether the sensor is triggered or not. This mode lasts up to 6 hours at night on a full charge.

Hint - make sure you have switched the unit to the desired mode before installation!

This product utilizes solar energy. Please choose a location that receives adequate sunshine to optimize its solar charging. The greater the charge received from the sunlight, the longer the illumination time. A mounting height of 2 to 2.5m is recommended.

The lamp will usually require 8 hours of sunlight to charge fully. The mounting position and location of the unit, weather conditions, and other climatic or seasonal variations (such as day length and cloudy days) will affect the charge and run-time of the lamp.