RF Battery Wall Touch Plate RGB/RGBW Controller - 4 Zone
- Buy 3 for Regular Price $75.90 each and save 4%
| Zones | 4 Zone |
|---|---|
| Function | RGBW |
| Input Voltage | Battery |
| Output | RF |
| Standby Power Consumption | <20μA |
| Operating Temperature | -30°C to +55°C |
| Remote Range | 30M |
| Remote Frequency | 2.4 GHz |
| Remote Battery | 2x AAA 3VDC |
| Weight | 0.156kg Net, 0.192kg Gross |
| Dimensions | 86mm Long x 86mm Tall x 20.5mm Deep overall, glass face 11.2mm Deep |
This RGBW Control unit is designed to be used with a our 12-36V RGB Controller or 12-36V Universal Controller directly through RF, so no need for pesky signal wire links! Being battery powered, there is no need for wires of any kind to run this wall panel!
When using the RF Recievers, you then also have the option of using a separate Remote Control alongside. If using with the Universal Controller specifically, you can also control this via WIFI using the Tuya App, giving you ultimate control over your lighting system!
It has a clean modern look with its glass touch panel, and it emits a pleasant sound to indicate when a touch has registered - however this can be turned on/off (muted) simply by pressing and holding the power button until it sounds. A blue indicator light shows just above the power button when the unit is powered off so that it is easy to locate in the dark.
This is a Master/Remote unit that sends an RF signal to a control RGB or RGBW LED products such as our RGBW Striplight or Outdoor lighting range, making it quite the versatile control system.
The lefthand 4 buttons control the 4 different zones available; press to turn on and long press 2 seconds to turn them off again. This enables you to control each zone individually, or all / a combination of zones at the same time.
Set it to a specific colour at any time simply by selecting the desired colour on the central colour stripe, or set white mode by touching the ‘W’ key at the bottom right of the panel.
Change to a mode and scroll through the different modes by touching the ‘M’ (mode) button. This will also jump back to the last mode set when touched after having set a static colour using the wheel dial.
Control the brightness of a single colour up and down, or change the speed of colour changing mode using the ‘BRT/SPEED’ button to the right hand side of the colour dial.
This square panel has two mounting options: it fits in a standard 86 size flush box or round European style flush box, or can be installed surface-mounted onto a wall (or other vertical surface) or can even just sit on your coffee table. This is particularly handy if the lighting and control panel are being retro-fitted and/or running power wires is not desirable or possible. For this reason it is ideal to use in Motorhomes and Caravans!
Please see the supporting info tab for more information in the product manual.
We also have these panels in 230V DMX and RF models and Battery Dimmer models models.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.