Reading Light Touch Dimmable - 3W 12/24V
| Housing Colour | Brushed Silver |
|---|---|
| Dimmable | Yes |
| Power Consumption | 3W |
| Input Voltage | 10-30V DC |
| Efficiency | 50Lm /W |
| Lumens | 150Lm |
| Beam Angle | 60° |
| Light Colour | Cool White (6000-6500K) |
| CRI | >80 |
| IP Rating | IP20 |
| Average Lifetime | 40,000 hours |
| Light Source | 1 x 3W SMD LED |
| Dimensions | Base D=65mm, H=16mm. Head L=89mm, D=34.5mm |
| Weight | 250g |
This surface mounted reading light has a modern brushed steel finish and opaque glass shade, which is stylish and modern in a range of applications. It has a touch sensor switch, and a small circular base. The head has a tilt range of 90°, and a rotational range of approx 345°.
The first press on the touch button turns on a small blue night light around the button, to make it easy to locate in the dark, and the second touch turns on the main light. Touch and hold the button to dim the light (and the same to reverse the dimming) - the light will remember the dim setting when it is next switched on.
It has a 60° beam angle, making it ideal for placing beside beds or seating areas for reading. It draws only 3W of power and produces 150 lumens of nice Cool White light which is perfect for reading.
Installation is easy: simply screw the mounting bracket into place using the screws supplied, then connect the power wires, followed by placing the light base over the bracket and fix using the single screw at the base of the fitting. The wires can be taken out through a small hole in the wall lining, and are covered by the light's base, leaving a clean finish. Simply wire up to any 12V or 24V DC source (such as a battery system) and enjoy glare free lighting.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.