Power Supply 48V 3.13A 150W - Meanwell ELG Series (Only 12 remaining)
- Buy 5 for Regular Price $169.90 each and save 2%
- Buy 10 for Regular Price $163.90 each and save 6%
| Input Voltage | 100-240V AC |
|---|---|
| Output | 48V 3.13A (150W) |
| Efficiency | 90% |
| Working Temperature | -40° - +90°C |
| Dimensions | L=219mm (incl. tabs), W=64mm, H=35.5mm |
| IP Rating | IP65 |
| Wire Length | Input L=280mm, Output L=280mm |
| Standards | SELV (Safety Extra Low Voltage) |
| SDoC | Available on request |
This is a constant voltage AC-DC power supply for powering LED lighting such as our 48V strip light. This DC power supply takes 230V mains, and outputs a regulated 48V DC up to a maximum load of 150W (3.13A).
The power supply is waterproof with an IP65 rating. The unit has a 3-pin plug out the mains input end, and 2-Core flying wires out the 48V DC output end. Each are clearly labelled for wiring, however you must make sure that it is installed by a qualified electrician if hard-wiring in, so the mains connections are safe.
This power supply is part of the Meanwell ELG series, which are SELV rated and are recommended for commercial jobs. They are constructed using a metal casing.
Supplier Declaration of Conformity (SDoC) is available on request - please contact us.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.