PIR Motion Sensor Recessed 12-24V DC 4A - White
- Buy 5 for Regular Price $21.90 each and save 12%
- Buy 10 for Regular Price $19.90 each and save 20%
| Housing Colour | White |
|---|---|
| Input Voltage | 12-24V DC |
| Max Output | 4A |
| Idle Current | 3.0mA |
| Sensor Range | <2m |
| Sensor Angle | 120° |
| On Time | ~40 seconds |
| Working Temperature | -20°C - 50°C |
| Max Power Load | 12V=48W | 24V=96W |
| Dimensions | L=19.5mm, D=16.5mm, Cut out=13.5mm |
| Wire Length | L=1.1m from sensor to connector box, L=1mm each input and output wires |
This recessed PIR sensor can be used for automatic lighting applications in your household, such as in hallways, kitchens, bathrooms and garages. This sensor is easy to install and simple to use.
Its compact size of just 20mm in length and 17mm diameter makes it perfect for discrete installations and is designed to be recessed into a surface. Once recessed, the face will protrude just 10mm from the surface. It comes with 1m long input and output wires (from the control box to the end of the wires) with small plugs on the ends, which can be cut off for wiring. There is an additional 1.1m between the sensor and the control box. This white control box, displayed in the 6th and 7th pictures above, is necessary to the functioning of the sensor and cannot be removed from the circuit.
PIR sensors detect infrared heat, making them ideal for sensing human bodies so the light can turn on when you enter the room. The sensor will detect any part of the human body once it is within 2m, activating the light. The light will stay on for as long as the body is within 2m and for a further 40 seconds after you move away more than 2m.
It runs from both 12V DC and 24V DC and is wired between the power supply and light. Each sensor comes with wires labelled for connecting the input and output, and plugs which can easily be cut off to expose the wires if needed. To install, cut a 14mm round hole into the surface and insert the sensor from the front, wires first.
Please note there is a minimum loading of 5W required for this sensor to operate correctly.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
