Neon Flex 24V
| Dimmable | Yes |
|---|---|
| Beam Angle | ~120° |
| Input Voltage | 24V DC |
| Light Colour | Cool White |
| Dimensions | H=26mm, W=13mm |
| IP Rating | IP66 |
| Average Lifetime | 50,000 hours |
| Light Source | 80 LEDs/ m |
| Power Consumption | 2.4W /m |
| Cut Length | 1m |
Sold and priced per length. Run up to 50m in a single length.
You need a power cord connector and a 24V power supply to run this rope.
LED neon flex emits a constant glow, simulating the effect of a neon tube but with the advantages of LED lighting, including long life and low power consumption. It is ideal for feature lighting in both home and commercial applications and is also great for signs.
The neon flex is constructed with two internal wires running 80 bright LEDs per meter. The light is diffused by a series of internal diffusing membranes so that the neon flex gives a consistent glow along the entire length. It can be powered from any 24V DC supply, or use our 24V power supplies, and consumes 2.2-3W per meter (colour dependent) so is perfect for low power effect lighting.
Purchase the exact length you require or buy more and trim as required. The neon flex can be cut at 0.8-1m intervals (colour dependent: Cool White, Yellow, Green can be cut at 1m lengths, Blue at 0.95m, and Red at 0.8m).
LED neon flex is 50% brighter than incandescent lighting and is a 100% solid state design, meaning there is no glass or filaments that could break. It has an extended life of 50,000 hours.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 12 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.