Mini In-Line RGBW Controller with Card Remote
- Buy 5 for Regular Price $46.90 each and save 6%
- Buy 10 for Regular Price $43.90 each and save 12%
| Zones | 1 Zone |
|---|---|
| Function | RGBW |
| Input Voltage | 12-24V DC |
| Output | 48W at 12V DC, 96W at 24V DC |
| Average Lifetime | 25,000 hours |
| Max Current | 4A total, 1A per channel |
| Modes | 22 modes, 20 static colours |
| Standby Power | 0.5W |
| Remote Range | >15m |
| Remote Frequency | 433.92MHz |
| Remote Battery | 1x CR2025 |
| Weight | 15g |
| Controller Dimensions | Panel L=65mm, W=14mm. Total L incl. wires=235mm |
| Remote Dimensions | W=48mm, L=100mm |
This mini in-line RGBW controller is designed for controlling resistor-based LED products, such as our RGBW strip light. It is capable of driving up to 4A, so it can run up to 48W of lighting at 12V DC and 96W at 24V DC.
The controller comes with an RF key card remote which takes 1x CR2025 button cell battery (included). The remote will remember its last setting, even after loss of power. Upon powering up from the power source (not the controller), the lights will flash briefly once to indicate that power is connected. Then the remote can be used to turn it on.
If using more than one remote or powering separate strips in the same house, use the following instructions to pair/unpair the remotes as needed:
- To pair the remote to the controller/strip, short press the match button on the controller, then immediately press the on/off button on the remote. The light should blink 3 times to indicate a successful pairing.
- To delete a pairing, press and hold the match key for 5 seconds to delete all matches. The light will blink 5 times to indicate all matches have been removed.
- You can pair a remote to multiple controllers.
Please see the supporting info tab for more information.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.