LED Mini Neon Flex 6x12mm 12V DC
| Dimmable | Yes |
|---|---|
| Beam Angle | ~120° |
| Input Voltage | 12V DC |
| Light Colour | Cool White |
| Dimensions | W=6mm, H=12mm (without end caps) |
| IP Rating | IP66 |
| Average Lifetime | 50,000 hours |
| Light Source | 120 LEDs/ m |
| Power Consumption | 14.4 W/m |
| Cut Length | 25mm |
Sold and priced per meter. Run up to 3.5m in a single length powered from one end.
Longer lengths can be used if powering from both ends, otherwise a noticeable drop in brightness occurs from one end to the other.
Mini LED neon flex emits a constant glow, simulating the effect of a neon tube but with the advantages of LED lighting. With its long life and low power consumption, it is ideal for feature lighting in both home and commercial applications and is also great for signs.
LED neon flex is a 100% solid state design, meaning there is no glass or filaments that could break. It has an extended life of 50,000 hours.
Your ordered length(s) will come with a 200mm wire 'tail' for connecting to a 12V DC power source - if you would like a longer wire please purchase multiples of wire (per meter) and specify the wire length required for each flex length. You will require a 12V DC power supply to run this flex.
The neon flex is constructed using a 12V LED strip featuring 120 bright LEDs per meter. The light is diffused by a series of internal diffusing membranes so the neon flex gives a consistent glow along its entire length. It can be powered from any 12V DC supply, and consumes 14.4W per meter, making it perfect for low power but bright effect lighting.
Purchase the exact length you require or buy more and trim as required. The neon flex can be cut at 25mm intervals, discreetly marked on the side of the flex.
This is also available in an RGB Colour-Changing model, that has a 4-wire input (requires a controller to make it change colour).
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 12 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
