In-Ground Light 12V - 3W RGB
| Dimmable | Yes |
|---|---|
| Housing Colour | Brushed Silver |
| Input Voltage | 11-13V DC |
| Power Consumption | 3W |
| Output | 130Lm |
| Efficiency | 86Lm /W |
| Light Source | 1 x 3W LED |
| Average Lifetime | 50,000 hours |
| Beam Angle | ~60° |
| Light Colour | Red, Green, Blue |
| IP Rating | IP67 |
| Working Temperature | < 45°C |
| Material | Marine Grade Stainless Steel SS316 |
| Weight | 207g |
| Cut Out | 35mm |
| Dimensions | H=68mm, Dia=45mm, Cable >1m |
This LED in-ground light is a robust waterproof unit designed to be mounted in the ground in areas such as patios, pathways, driveways, or decks. It has a high power 3W CREE LED mounted inside a marine grade stainless steel IP67 housing, that sits inside an outer protective casing in the ground. If the outer casing is removed, the base of the unit measures 33mm in diameter. If this outer casing is not required, you can simply remove it.
This is a 4-wire RGB colour-changing product, so you will require a controller unit to change and set the colour output. You can see our range of RGB controllers here. When used with an RGB controller, you can set the colour or have it flashing/fading through the colours - the modes available depend on the model of controller used.
These lights are about equivalent to about a 15W halogen bulb.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.