In-Ground Light 12V - 1W - RGBW
| Housing Colour | Silver |
|---|---|
| Input Voltage | 12V DC |
| Power Consumption | 1W |
| Light Source | 3x 5050 SMD LEDs |
| IP Rating | IP67 |
| Light Colour | RGB + Warm White |
| Cable Length | 950mm |
| Dimensions | L=50mm, Dia=50mm |
| Dimmable | Yes |
| Material | Aluminium + PC |
This LED in-ground light is designed to be mounted in the ground in areas such as gardens, patios, pathways, driveways, or decks. The unit has 3x 4-in-1 RGBW LEDs mounted inside a Polycarbonate body with potted electronics, making a well-sealed IP67 housing.
It has a nice diffused glow perfect for feature lighting, with low power consumption and low heat radiation. Its low-profile elegant design incorporates a brushed sliver anodised aluminium face ring. This item will add value and brightness to your outdoor areas.
It comes with a black plastic mounting sleeve that can be mounted into the ground or concrete to allow for easy wire connection and installation after the ground preparation.
This is an RGBW colour-changing product and when used with an RGBW controller you can set it to flash or fade through the colours.
If you need a smaller model, see our RGBW Deck Light.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.