Flood Light with Sensor 230V - 20W
| Housing Colour | Silver |
|---|---|
| Input Voltage | 85-265V AC |
| Power Consumption | 20W |
| Light Source | 1 x 20W LED |
| Output | 1800Lm |
| Efficiency | 90Lm /w |
| Average Lifetime | 50,000 hours |
| Beam Angle | ~120° |
| Working Temperature | -40°C - 55°C |
| Working Humidity | 10 - 90% |
| CRI | Ra >70 |
| Power Factor | >0.93 |
| Light Decay | <15% (30,000 hours) |
| IP Rating | IP64 |
| Light Colour | Cool White (6000K) |
| Cable Length | L=430mm |
| Dimensions | W=180mm, H=210mm, D=100mm |
| Dimmable | No |
| Weight | 1Kg |
| SDoC | Available on request |
This LED flood consumes only 20W, yet it can replace a 160W halogen flood light, capable of lighting up a small court, backyard or work bay.
It runs directly from mains 230V AC and comes with a mounting bracket for easy installation in any location. As with any sensor light, you can adjust the daylight level, sensitivity and on time. The unit has a built-in quality Mean Well driver for extended lifetime.
This flood light will save you over $1500 over its operating life of 50,000 hours!
Note: These flood lights are rated IP64, so they should be installed under cover such as an eave or carport.
Sensor Technical Data:
- Detection Range: 8-12m
- Detection Angle: 180°
- Light Level Adjust: 5-1000 Lux
- On Time Adjust: 5 sec - 5 min ±20%
Supplier Declaration of Conformity (SDoC) is available on request - please contact us.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.