DLK Series Downlight 5W 160° Dimmable & Colour Selectable
- Buy 5 for Regular Price $30.90 each and save 6%
- Buy 20 for Regular Price $28.90 each and save 12%
| Dimmable | Yes |
|---|---|
| Housing Colour | White |
| Input Voltage | 220-240VAC |
| Power Consumption | 5W |
| Lumens | 550Lm |
| Efficiency | 110Lm/w |
| Light Source | 24 x ORSAM 2835 LEDs |
| Average Lifetime | 50,000 hours |
| Beam Angle | 160° |
| Light Colour | Warm 3000K/Neutral 4000K /Cool 6000K White |
| IP Rating | IP44 |
| Working Temperature | < 60°C |
| Classification | IC |
| Weight | 157g |
| Cut Out | 70-85mm |
| Dimensions | H=33mm, D=100mm |
| SDoC | Available on request |
Choose your light colour with these easy set-and-forget dimmable downlights!
Tailor the lighting to suit each room!
These modern contemporary looking downlights feature a discreet low profile matte white finish with a diffused lens making them perfect for modern homes. This range is economical to purchase and run, while remaining dimmable and visually appealing!
Setting the colour temperature is super easy - simply manually switch it to Cool White (6000K), Neutral White (4000K), or Warm White (3000K) with the in-line slider before installing the light.
The DLK series is rated IC (Insulation Cover) for maximum energy savings. Click here for the standards information.
This DLK series of LED downlights is constructed using the latest in LED technology from OSRAM Electronics, and housed in a white powder-coated aluminum shell for quality natural heatsinking of the LED. They have strong spring clips to hold it securely in place in the ceiling lining, and with a wide 160° beam angle, they are ideal for general lighting.
The downlights have a double-layer diffuser - one frosted and one prismatic - to increase the light dispersion. The prismatic layer is removable if preferred, leaving the flat matte frosted diffuser for a slightly tighter light spread.
Each light comes ready to install with a quality driver that is dimmable from 0%-100% with our KIWI Electronics Wall Dimmer set on Trailing Edge (TE).
These downlights simply fit into a ceiling cutout of 70-85mm and eliminate the issues of heat and bulb replacement that are usually associated with older traditional recessed lighting. The small size is perfect for replacing those energy-hungry halogen downlight fittings, or as a new installation for long term power savings.
The 5W model outputs 550 lumens, making it equivalent to a 40W incandescent light bulb. It comes complete with a quality dimmable driver.
Please read installation instructions fully before attempting any work.
Supplier Declaration of Conformity (SDoC) is available on request - please contact us.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.