Bulk Head Light 10W 230V White - Cool White
| Housing Colour | White |
|---|---|
| Input Voltage | 85-265V AC |
| Power Consumption | 10W |
| Output | 900Lm |
| Efficiency | 90Lm /W |
| Beam Angle | 120° |
| CRI | Ra >80 |
| IP Rating | IP65 |
| Light Colour | Cool White |
| Dimensions | L=220mm, W=135mm, H=65mm |
| Dimmable | No |
| Material | Aluminium & PC |
| SDoC | Available on request |
This outdoor light fitting is perfect for installing under eaves or on walls around the outside of your home.
It is built from white powder-coated aluminium with a polycarbonate lens. It has 50 SMD LEDs which give you a 120° spread of light. This fitting runs from 230V AC and draws a total of 10W. It outputs 900 lumens of Cool White light.
Rated IP65, these units are waterproof, dust tight, and protected from water jets. Ensure the rubber seals located where the wires exit at the rear of the unit, and between the rear panel and the main unit, are in place to ensure it is watertight. The unit is earthed internally by an individual screw to the casing.
Each fitting comes with 2x nylon screw anchors and 2x phillips head csk screws as mounting hardware.
This is a 230V AC product and should be installed by a qualified electrician.
We also have a similar model available in Warm White with black casing.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
