Cabinet Light 12V 7W Slim - RGBW
| Dimmable | Yes |
|---|---|
| Housing Colour | Brushed Silver |
| Input Voltage | 11-14V DC |
| Power Consumption | 7W |
| Lumens | 450Lm |
| Efficiency | 63Lm /w |
| Light Source | 9 x SMD LEDs |
| Average Lifetime | 25,000 hours |
| Beam Angle | ~120° |
| Light Colour | Red, Green & Blue + 3000K |
| IP Rating | IP20 |
| Working Temperature | < 60°C |
| Dimensions | H=9.5mm, D=60mm |
| Wire Length | 1.95m |
This LED cabinet light is low-profile, surface mounted lighting solution where space or mounting options are limited. Featuring a wide 120-degree beam angle, it is constructed with 9x SMD LEDs and a durable brushed aluminium casing for a clean, modern finish.
The stylish light looks great in motorhomes or caravans as a cabinet light or even as stairway lights. As an unobtrusive 12V light, the applications for this little light are numerous!
Set the light to a nice warm white for a traditional look, or add a splash of colour for something different!
As an RGB+3000K light, it has the ability to be set to Warm White (3000 Kelvin), a single colour such as Red, Green, or Blue, or any custom colour mix, It can also cycle smoothly through colours, depending on the capabilities of the controller it is installed with.
To access the full functionality of this light, an RGBW controller is required which is installed between the light and the power source [view our range of RGBW controllers here], or if you only ever want one single colour it can be hard-wired permanently without a controller (colour choice limited).
Mounting the lights is easy - when you have the wiring in place, just twist the light to unscrew the face, then align the holes in the circuit board with the ones in the back casing and fasten the unit to the surface with the supplied screws.
This light comes with 1.95m of cable, with a JST connector plug fitted to the end. This plug can simply be cut off to for direct wiring to a 12V DC supply (black striped wire is the negative), or contact us about supplying custom looms with connectors.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship. This item is covered for 24 months from the time of sale. In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable. Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.