Button Switch Internal for Channel Dimmable 12-24V DC 8A

In stock
Regular Price $19.90
  • Buy 5 for Regular Price $17.90 each and save 10%
Technical Data
Input Voltage12-24V DC
OutputUp to 96W of 12V, 192W of 24V DC LED lighting
DimensionsL=45mm, W=10mm, H=11.5mm

This button switch works to activate and dim 12 or 24V DC LED products. It is designed to be used and installed alongside LED strip light inside an aluminium channel no more than 9.5mm deep, but could be installed into deeper channels or other enclosures with packing, or used 'bare'.

It is ideal for use in the home as well as in motorhomes and caravans for dimmable lighting. Measuring just 8mm in width, this switch is very discrete. To operate, simply press a finger to the button to turn on and off. To dim, press and hold until the desired light setting is reached. Repeating this process reverses the dim function and increases the brightness until full brightness is reached.

The light will remember its last setting and will turn back on at the previous brightness when using the button switch. It will not remember its last setting after power loss or when paired with a wall switch.

To install, solder the input wire to the V+ and V- at the input end of the PCB board, and the LED strip light to the LED+ and LED- at the output end. We recommend using silicone or other glue to fix the PCB to the installation surface.

Pricing is per sensor.

Write Your Own Review
You're reviewing:Button Switch Internal for Channel Dimmable 12-24V DC 8A
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 24 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.

Button Switch Internal for Channel Dimmable 12-24V DC 8A is available to buy in increments of 1