BAU15S 15mm Bayonet - 18 Super LED 12V
Out of stock
SKU
LED-BAU15S18S3
Technical Data
| Automotive Base Type | BAU15S 15mm bayonet, PY21W |
|---|---|
| Dimmable | No |
| Input Voltage | 10-15V DC (polarity protected) |
| Power Consumption | 3W |
| Light Source | 18x 5050 SMD LEDs |
| Output | 200Lm |
| Average Lifetime | 40,000 hours |
| Beam Angle | ~270° |
| Light Colour | Yellow/Amber |
| Dimensions | L=50mm, D=18mm |
This 15mm bayonet base bulb is our brightest BAU15S and is a replacement for indicator lights. They have 18 5050 SMD LEDs in total, with 3 on the end and 15 radially mounted aiming 90 degrees from the base.
This bulbs is equivalent to a 28-30W incandescent.
Note: This is a specialty bulb, a single filament, single contact bulb with locator pins offset radially around the base of the bulb. There is a single positive contact on the bottom of the bulb, and the casing and locator pins of the bulb are the negative. If you are looking for a single contact bulb with evenly located pins, please see our 1156 bulbs here. The BAU15S base requires positive to the bottom contact. If your socket is wired differently, it will not work, and you can fix this by swapping the wires to the socket.
Write Your Own Review
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.