6-Core DC Ribbon Cable for RGB + CCT Strip (Only 86 remaining)
- Buy 10 for Regular Price $3.00 each and save 6%
| Sheath Colour | Black / Yellow / Green / Red / Blue / White |
|---|---|
| Conductor | 6x 26C TACW (Tinned Annealed Copper Wire) |
| Conductor Size | 0.5mm² (20AWG) |
| Wire Length | Sold per meter |
| Insulation | VW-1 Flexible PVC 80°C |
| Cable Type | 6-Core DC Flat / Ribbon |
| Features | Extra Low Voltage, Not For Mains Connection |
| Dimensions | 11mm m 1.9mm |
If you require our RGB + CCT strip wired with a longer lead, then purchase the length of wire you need and we will extend it for you.
Wire length should be kept to a minimum, where the maximum length will depend on the total power draw over the wire. As a rule of thumb, there is a voltage drop of approximately 0.004V per meter of wire for every watt of load at 24V DC.
Example: If you ran 2m of LED-SL5050N24RGBW which draws a total of 40W with a 2m tail, the total voltage drop will be 0.004 x 2 x 40 = 0.32V. The total voltage drop should be kept below 0.8V for RGB.
If you require a long length and are unsure if it will be too long, contact us and our engineer can advise you. We may be able to supply a heavier gauge wire.
Pricing is per meter.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.