5-Core DC Ribbon Cable for RGBW Strip (Out of Stock)

Out of stock
SKU
LED-WR5CDCR
Regular Price $3.90
  • Buy 5 for Regular Price $3.50 each and save 10%
  • Buy 20 for Regular Price $3.20 each and save 18%
Technical Data
Voltage Drop (at 12V)0.008V / Wm
Sheath ColourBlue / White / Red / Green / Black
Conductor5x 26C TACW (Tinned Annealed Copper Wire)
Conductor Size0.5mm² (20AWG)
Wire LengthSold per meter
InsulationVW-1 Flexible PVC 80°C
Cable Type5-Core DC Flat / Ribbon
FeaturesExtra Low Voltage, Not For Mains Connection
Dimensions9.0mm x 1.8mm

If you require our RGBW strip wired with a longer lead, then purchase the length of wire you need and we will extend it for you.

Wire length should be kept to a minimum, where the maximum length will depend on the total power draw over the wire. As a rule of thumb, there is a voltage drop of approximately 0.004V per meter of wire for every watt of load at 24V DC.

Example: If you ran 2m of LED-SL5050N24RGBW which draws a total of 40W with a 2m tail, the total voltage drop will be 0.004 x 2 x 40 = 0.32V. The total voltage drop should be kept below 0.8V for RGB.

If you require a long length and are unsure if it will be too long, contact us and our engineer can advise you. We may be able to supply a heavier gauge wire.

Pricing is per meter.

Write Your Own Review
You're reviewing:5-Core DC Ribbon Cable for RGBW Strip (Out of Stock)
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 24 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.