4-Core DC Flex Cable for RGB Lighting - White
|Sold per meter
|NZ Safety Approved
|4-Core DC Flex
Use this wire for our low voltage RGB products. It has 4 internal wires.
If you require the product wired with a longer lead, then purchase the length of wire required and we will extend it for you.
Wire length should be kept to a minimum, where the maximum length will depend on the total power draw over the wire. As a rule of thumb, there is a voltage drop of approximately 0.008V per meter of wire for every watt of load at 12V DC.
Example: If you ran 2m of LED-SL5050NRGB which draws a total of 30W with a 2m tail, the total voltage drop will be 0.008 x 2 x 30 = 0.48V. The total voltage drop should be kept below 0.8V for RGB.
If you require a long length and are unsure if it will be too long, contact us and our engineer can advise you. We may be able to supply a heavier gauge wire.
Pricing is per meter.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.