3M Cool White Strip Light Kit with Mini RF Controller
| Dimmable | Yes |
|---|---|
| Input Voltage | 12V DC |
| Power Consumption | 28.8W total (9.6W/m) |
| Brightness | 2580Lm total (860Lm/m) |
| IP Rating | IP20 |
| Light Source | 120 x 3528 LEDs /m |
| Light Colour | Cool White (6000-6500K) |
| Beam Angle | ~120° |
| Type | Alternating Sequence (with Controller) |
| Cut Length | No |
| Dimensions | Strip: W=5mm, H=2.4mm, Remote: W=40mm, L=86mm, H=7mm, Controller: L=265mm |
This affordable strip light kit has everything you need to add some light to your home. It includes 3 meters of Cool White strip light, a wall-adapter power supply, dimmer/controller and RF card remote.
This is an ideal solution for decorative lighting in kid's bedrooms, or in your Man-Caves and She-Sheds, or as a low-cost option for lighting anywhere in your house.
The strip light inside this kit comes in a single 3-meter length. It is non-waterproof so must not be installed anywhere it may come into contact with moisture. It comes with a 3M double-sided tape on the back, making it easy to peel and stick in place.
The power supply plugs into any mains wall socket and comes with 2m of cable. The controller comes pre-wired to the strip light, and there is approximately 250mm from the first LED to the end of the plug on the controller. Both the power supply and the controller have barrel jack plugs which simply need to be connected when installing.
The controller has 8 dynamic modes and is speed and brightness adjustable. The remote takes a CR2025 button cell battery which is included, just remove the plastic battery shield before first use.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 12 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.