3-Core DC Ribbon Cable for Colour Temperature Adjustable Strip
- Buy 5 for Regular Price $3.50 each and save 10%
- Buy 10 for Regular Price $3.10 each and save 21%
| Voltage Drop (at 12V) | 0.008V / Wm |
|---|---|
| Sheath Colour | Brown / Yellow / White |
| Conductor | 3x 26C TACW (Tinned Annealed Copper Wire) |
| Conductor Size | 0.5mm² (20AWG) |
| Wire Length | Sold per meter |
| Insulation | VW-1 Flexible PVC 80°C |
| Cable Type | 3-Core DC Flat / Ribbon |
| Features | Extra Low Voltage, Not For Mains Connection |
| Dimensions | 5.5mm x 1.9mm |
This flat cable has 3 wires, which when used for a Colour Temperature Adjustable product is one for Common (positive), and two for negative (one for Cool White, and one for Warm White), and it can be used with our colour temperature adjustable strips (CCT), which are a 3-wire product.
If you require the product wired with a longer lead, then purchase the length of wire required and we will extend it for you.
Wire length should be kept to a minimum, where the maximum length will depend on the total power draw over the wire. As a rule of thumb, there is a voltage drop of approximately 0.008V per meter of wire for every watt of load at 12V DC.
Example: If you ran 2m of LED-SL352812NCCT which draws a total of 38.4W with a 2m tail, the total voltage drop will be 0.008 x 2 x 38.4 = 0.615V.
If you require a long length and are unsure if it will be too long, contact us and our engineer can advise you.
Pricing is per meter.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.
