2-Core DC 0.75mm Flex Cable for LED Lighting - White
| Sheath Colour | White |
|---|---|
| Conductor | 2x 41C TACW (Tinned Annealed Copper Wire) |
| Conductor Size | 0.75mm² (18AWG) |
| Wire Length | Sold per meter |
| Insulation | VW-1 Flexible PVC 80°C |
| Cable Type | 2-Core DC Round Flex |
| Features | Extra Low Voltage, Not For Mains Connection |
| Dimensions | ∅ = 5mm |
If you require a long lead for low voltage LED lighting, you may need a heavier gauge 2-Core wire to minimize the voltage drop. We have this 2-Core round flex wire that can be used for this purpose. You can purchase the length of wire you want, and we will wire it onto the light for you.
For example, we can add custom lengths of wire onto our LED strip light.
Wire length should be kept to a minimum, where the maximum length will depend on the total power draw over the wire. As a rule of thumb, there is a voltage drop of approximately 0.004V per meter of wire for every watt of load at 12V DC. At 24V, the voltage drop is half.
Example: If you ran 2m of LED-SL5050NCW which draws a total of 30W with a 3m tail, the total voltage drop will be 0.004 x 3 x 30 = 0.36V. The total voltage drop should be kept below 1V.
We also have this available in a Black Flex.
If you require a long length and are unsure if it will be too long, contact us and our engineer can advise you.
Pricing is per meter.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.