BA9S 9mm Miniature - 9 LED

Out of stock
Technical Data
Automotive Base TypeBA9S 9mm Bayonet, T4W
Input Voltage11-14V DC
Power Consumption2.5W (at 13.8V)
Light Source9 x SMD LEDs
Average Lifetime40,000 hours
Beam Angle~270°
Light ColourBlue
DimensionsL=36.5mm, W=11mm

Replace your motorbike or map reading bulb with this surprisingly bright LED automotive bulb. It is a drop-in replacement for your current bulb and is constructed with super bright SMD LEDs which are durable, shockproof and long-lasting. It is constructed with 1 LED on the end and 8 LEDs at 90 degrees to the axis, allowing light to shine out at all angles.

These bulbs must have the correct polarity. They require positive on the tip and negative on the case.

Note: This is a single filament, single contact bulb with evenly located pins, where there is a single positive contact on the bottom of the bulb, and the casing and locator pins of the bulb are the negative. The BA9S base requires positive to the bottom contact. If your socket is wired differently, it will not work, and you can fix this by swapping the wires to the socket.

Write Your Own Review
You're reviewing:BA9S 9mm Miniature - 9 LED
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 24 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.