Strip Light Digital Chasing 5V Waterproof
|Input Voltage||5V DC|
|Power Consumption||18W /m|
|IP Rating||IP67 (weather proof)|
|Average Lifetime||40,000 hours|
|Light Source||60 x 5050 LEDs /m|
|Light Colour||Red 625nm/Green 515nm/Blue 460nm|
|Standards||RoHS, Zero UV & IR radiation|
|Working Temperature||-20 - 60°C|
|Dimensions||W=12mm, H=4mm. Multiples of 16.5mm (5m max)|
Priced per meter. Run up to 5m in a single length.
This flexible LED strip light is the perfect solution for decorative lighting. It has 60x 5050 LEDs per meter, and each LED has a WS2811 driver chip built in. This gives the ability to set the colour and brightness for each LED individually via our digital strip controller.
It is constructed with a very flexible circuit conducting strip which the LEDs are mounted on and comes with an adhesive 3M backing. Once purchased, the strip light can be cut at every LED (approx. 17mm intervals) and cut lengths can be joined or run from a separate power supply making it very versatile.
Although this strip light is sold in 1m lengths, you may purchase single length multiples of 1m. For example, you may purchase a single 3m length.
This strip runs from 5V DC, so it cannot be run from a 12V power supply like our other strip light.
If you require custom lengths (multiples of 17mm or number of LEDs), purchase a waterproof strip light wiring service for each additional length and specify the lengths you require in the comments field during the checkout process.
This strip is waterproof. If you require a non-waterproof version, see it here.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.