Strip Light 60 5050 LEDs/m 14.4W/m 24V - Waterproof - RGB Cool White
|Input Voltage||24V DC|
|Power Consumption||14.4W /m|
|Brightness||Red: 120Lm, Green: 300Lm, Blue: 110Lm, White: 420Lm|
|Average Lifetime||40,000 hours|
|Light Source||60 x 5050 LEDs/m|
|Light Colour||R=620-630nm, G=510-525nm, B=455-470nm, CW=6000K|
|Working Temperature||-20 - 60°C|
|Dimensions||14.5mm wide, 5mm high, multiples of 10cm (5m max)|
Priced per meter. Run up to 5m in a single length.
This flexible LED strip light is perfect for background lighting, lighting in cupboards and decorating your home.
It is constructed with a very flexible circuit conducting strip on which the LEDs are mounted, coated with a protective rubber cover and comes with an adhesive 3M backing. Once purchased, the strip light can be cut at 100mm intervals, and cut lengths can be wired together or run from a separate power supply making it very versatile.
This strip is IP68 waterproof making it ideal for outdoor installations or in bathrooms and kitchens where moisture can be an issue.
The RGBCW version of this strip has a designated White LED chip, meaning it can produce a Cool White light as well as a Red, Green, and Blue. This differs from our RGB products which create a white light by mixing the three colours together.
Although this strip light is sold in 1m lengths, you may purchase single length multiples of 1m. For example, you may purchase a single 3m length.
Please note that we are unable to supply a single length longer than 5m. If you purchase a quantity more than 5, please specify the lengths you require, otherwise we will make it up with 5m lengths where possible.
If you require custom lengths (multiples of 100mm) made up from your purchased amount, purchase a waterproof strip light wiring service for each additional length and specify the lengths you require in the comments field during the checkout process. For example, if you purchase 2m in total and want 1x 1.5m and 1x 0.5m lengths, just purchase 1x wiring service (1x wiring service is already part of the strip light length) and specify this in the comments field during checkout.
For a clean and modern look, install this strip light in one of our aluminium strip light channels.
Please note that as an RGB colour changing product, you will require a controller unit to change and set the colour output on this product. You can see our range of controllers here. When used with an RGB controller, you can set the colour or have it flashing or fading through the colours - the modes available depend on the model of controller used.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.