Rope Light 2-Wire 230V 10M Kit

In stock
Special Price $75.90 Regular Price $127.20
Technical Data
Input Voltage220-240V AC
Dimensions13mm round
IP RatingIP65
Average Lifetime50,000 hours
Light Source36 LEDs /m
Power Consumption2.9W /m (29W total)
Cut Length2m
SDoCAvailable on request

This Rope Light kit contains 10M of your chosen colour, an end cap, 30 mounting clips, power cable, and waterproofing service.

This LED rope light is perfect for use as feature lighting in both home and business environments. It has been particularly popular where movement of light is required. The rope light is designed with two internal wires running 36 bright LEDs per meter and is powered directly from 230V, so it does not require a power supply.

2-wire power cable (included) is required to run this rope light. It is very easy to connect and setup. The rope light can be cut at the cut marks located every 2 meters.

LED rope lighting is 35% brighter than incandescent rope and is a 100% solid state design meaning there is no glass or filaments to break. LED rope lighting is the most durable of all rope lighting and lasts for up to 50,000 hours.

The rope light itself is waterproof, however the end cap and power cable connections will need to be sealed for outdoor use. This service is provided as pat of this kit.

Whilst the rope light is waterproof, it is not suitable for installation on roofs or other areas where it is exposed to extreme temperatures. It is suitable for under eaves and handrails etc. where some protection is provided.

The rope can be cut to length, but must be cut at the marks which are located every 2 meters.

Supplier Declaration of Conformity (SDoC) is available on request - please contact us.


Rope light is dimmable, but there are a few catches. Firstly, as with all LED lighting, the dimmer needs to support the low wattage of LED lighting. Our KIWI Electronics Wall Dimmer runs down to 10W, so it can dim the rope light if you have about 6-8m or more. Typically, you can get a dimming range of 20 - 100%. The full range of the dimmer is not required, so use the minimum setting on the dimmer to adjust.

Write Your Own Review
You're reviewing:Rope Light 2-Wire 230V 10M Kit
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 12 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.