Oblong Pool Light 12V - 18W RGB

In stock
SKU
LED-PL712
Regular Price $69.90
Technical Data
DimmableYes
Housing ColourWhite, Silver
Input Voltage11-13V DC
Power Consumption18W
Light Source6 x 3W LED
Average Lifetime30,000 hours
Beam Angle~60°
Light ColourRed, Green, Blue
IP RatingIP68
Working Temperature< 45°C
StandardsCE & RoHS
Weight363g
DimensionsW=66mm, L=169mm, D=23mm, Cable= ~1m

This LED pool light is a robust waterproof unit designed to be mounted underwater on the side or bottom of a swimming pool or spa, or even a decorative pond or water feature. It has 6 high power 3W Epistar LEDs mounted inside a stainless steel and white PC IP68 housing.

It can be mounted from the stainless steel bracket supplied, or if the outer casing is removed, you can use a series of 4 screws in place and mount it straight on the desired surface (then replace the outer casing) without the bracket.

This unit is dimmable down to 20% with our range of LED PWM dimmers, and is equivalent to a 65W incandescent bulb.

This is a 4-wire RGB colour-changing product, so you will require a controller unit to change and set the colour output. You can see our range of RGB controllers here. When used with an RGB controller, you can set the colour or have it flashing/fading through the colours - the modes available depend on the model of controller used.


This light comes with a white surround, but we also have silver surrounds available on request. Leave a comment in the checkout field if you would like silver.

Write Your Own Review
You're reviewing:Oblong Pool Light 12V - 18W RGB
Your Rating

All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.

This item is covered for 24 months from the time of sale.

In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.

Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.