LEDstuff DMX 4-Channel Controller - Basic
- Buy 5 for Regular Price $65.90 each and save 6%
|Input Voltage||8-28V DC|
|Output||5A /channel (max 15A total)|
|Working Temperature||< 50°C|
|Dimensions||L=180mm, W=48mm, H=23mm|
Designed using the latest in modular dimming technology, you can now have a low voltage PWM dimmer mounted on a standard wall plate!
The new modular design contains a wall plate mounted knob wired (with a standard network cable - not supplied) to the dimming unit. By locating the dimming unit close to the power supply and the light being controlled, it eliminates the problems that can occur with long, high current cabling to and from the wall plate.
Modular design eliminating problems with long high current cabling
Fits all standard wall plates using one of the supplied adapters
Min/Max trim for a user selectable dimming range
Dual channel output allowing for more driving capacity
Standard network cabling
Advanced modules available at request (daisy chain, addressable etc.)
This PWM LED dimmer is suitable for dimming LEDs, LED strip light, G4 bulbs, LED modules and more. It can drive up to 5A per channel up to a maximum of 15A (over 20m of our 24V strip light) and can run from between 8V and 28V.
The dimming unit is wired in series between the power supply and the product being dimmed.
Please note this does not come with a network cable - this will have to be sourced separately. The length you will need will depend on the distance between the location of the controller unit and the location of the base unit. These are readily available in multiple lengths from all computing supplies retailers, or your electrician can terminate one during the installation.
- Wire the wall plate dimmer and dimming unit together with a standard network cable (such as Cat-5e).
- Wire the power supply into the GND negative and VIN positive terminals.
- Wire the LED load to the OUT- negative terminals and the VOUT positive terminal.
All LEDstuff products are supplied with a warranty that the item is free from defects in materials and workmanship.
This item is covered for 24 months from the time of sale.
In the event of a warranty claim, LEDstuff reserves the right to repair or replace the product where applicable.
Faults due to misuse, alteration, normal wear, or accident are not covered under warranty.